Quality Fit Glass Clamp Kit For 17.5mm Glass

Our Quality Fit Clamp Kit is compatible with glass thickness between 12mm and 17.5mm. Your clamp kit is tailored to your glass thickness selection. The clamp kits are used with the Quality Fit Frameless Channel to secure the glass in place.
In each clamp kit you will receive enough ‘clamps’ for positioning every 250mm on the glass and a rubber seal/ gasket to sit on top of clamps. The rubber has grooves to match the channel for easy installation. This rubber sits on a slight angle to allow water to prevent water build up. The clamps have one fixed side and one side that can be tightened with an Alan Key. The clamps should be tight enough so there is little to no movement in the glass closest to the track. There is no adjustment for the glass with these clamps making them super easy to install!

The clamp kit is available to suit a 2.5m and 5m length of channel, please ensure you select the correct glass thickness and length required for your application. This clamp kit suits 17.5MM glass for 2.5M length

If you’re unsure about what glass thickness you require, please contact our team and we can advise as best as we can!