Origin Easy Fit Channel is a fully adjustable system. It can used in both residential and commercial applications. 

 When to use Easy Fit:
<ul>
 	<li>Fully adjustable it is an ideal system to use if the ground is uneven</li>
 	<li>Can be used for both commercial and residential applications. If you need a 1.5kN using 21.5mm SENTRY glass. </li>
</ul>
Installing Easy Fit

Origin Easy Fit is installed by placing the panels within the clamps and tightening using a spanner which we can supply.

Easy Fit

Ideal for commercial applications, it can meet the higher line load test of 1.5kn (which is often required) using fewer fixings.

Fully tested to 1.5kN (the required line load test for many commercial applications) using 21.5mm glass. Flex Fit Pro can be adjusted from one side saving substantial cost in terms of renting scaffolding or a cherry picker.

Increased mounting distances which make it cheaper (in terms of the number of fixings required) and quicker to install.

Flex Fit Pro is a wedge-based system. It is helpful to have the tool which then allows you to adjust the glass within the profile. This video will support with Installation of Flex Fit Pro.

<a href="https://www.youtube.com/watch?v=HfWM68MEJ7g&amp;t=20s">https://www.youtube.com/watch?v=HfWM68MEJ7g&amp;t=20s</a>

Flex Fit Pro

Browse our commercial channel systems at Origin Architectural today

Channel - Commercial

Side

End cap shaped left side fix with cladding for staircase

End Cap With Side Cladding (Left)

LEFT

Side Mount For Flex Fit Pro Channel

End Cap for Staircase

End Cap With Side Cladding

Left End Cap

Left End Cap With Side Cladding

End cap shaped right side fix with cladding for staircase

End Cap With Side Cladding (Right)

RIGHT

Right End Cap

Right End Cap With Side Cladding

Length 1

Our Easy Fit channel is the only system available in 3000mm lengths, we do have a bespoke cutting service available to cut your channel to size. Our balustrade U-channels have matching clamp kits for various glass thicknesses and required fitting tools. Our experienced team are here to help to ensure you get the right system for your requirements, so don’t hesitate to get in touch and ask for advice! 
The Easy Fit 3m floor mounted base rail is made from anodised aluminium, suited for both internal and external applications, and naturally protected against salt water and corrosive conditions. This frameless glass balustrade U-Channel is suitable for installations up to 1.5kN making it perfect for commercial and domestic applications. 
Easy Fit is designed to provide the greatest possible adjustment opportunities, this system enables each panel to be perfectly aligned during, or even after, installation. This innovative screw-clamp technology locks glass panels into position effortlessly, with four immobilising fasteners per meter of channel. 
Origin’s base drilled easy fit channel requires two top clips (also know as top strip cover plates, cover plate top&#8217;s) per length which can be purchased separately on our website. 
The channel arrives with pre-drilled holes at 150mm centres, designed to suit M10 bolts/screws depending on your application. You can purchase fixings separately on our website to suit steel, concrete, stone or timber. 
At the Origin Architectural, we believe in providing you with choice, which is why we can offer bespoke sizing and RAL/BS colours at a small surcharge, so contact us to discuss our bespoke range! Most colours are available with a matt finish, gloss is available in black and silver colours and textured finishes are also possible on selected colours.

3M Base Drilled Channel

Base Mount Fixing System

base drilled channel for frameless glass balustrade

Easy Fit 3m Base Drilled Channel

Our M10 chipboard screws are perfect for fitting your channel into timber. These high-quality screws are specifically designed to provide a strong and secure hold in wood, making them ideal for use in a variety of construction and carpentry applications. This fixing is great for our Easy Fit channel system. Whether you&#8217;re a professional contractor or a DIY enthusiast, these screws are an essential addition to your toolkit. If you’re unsure about what fixings you require, please contact our team and we can advise as best as we can!

Fixing To Timber (NOT TESTED) - Hex Head

Portia

Portia Fixings

Fixing To Timber

M10 chipboard screws

Our Easy Fit drainage block is the perfect solution for anyone who has built an area on a slope and is at risk of water pooling or flooding. This block is designed to fit underneath the easy fit channel, raising the profile slightly to allow water or rain to pass beneath it. 
Made from high-quality, weather-resistant materials, this block is built to withstand the elements. It&#8217;s durable and long-lasting, so you can trust it to protect your property from water damage. The block is also easy to install. Simply place it underneath every fixing hole in your balustrade channel and you&#8217;re good to go. 
Not only does this block protect your property from water damage, it also helps to keep your balustrade looking its best. By allowing water to drain away, it prevents pooling and helps to prevent the build-up of dirt and debris. So if you want to protect your property and keep your balustrade looking its best, this drainage block is a must-have. So, it&#8217;s an essential component for anyone who has built an area on a slope and is more liable to have water build up.

Drainage Block For Easy Fit Channel System

Side Mount Fixing System

Drainage Block

Easy Fit drainage block

Our dowel is the perfect solution for connecting two easy fit balustrade channel profiles together. Made from high-quality aluminium, this dowel is strong and durable, able to withstand the rigors of everyday use. It features a smooth, polished finish that will complement any balustrade installation. 
At just 30mm in length, this dowel is compact and easy to install. Simply slide it into the channel of one profile, then secure it in place with a set screw. The dowel will hold the two profiles firmly in place, creating a seamless and secure connection. 
This dowel is suitable for both indoor and outdoor use, making it a versatile choice for any balustrade project. Whether you&#8217;re installing a new balustrade or replacing an old one, our dowel is the perfect solution for connecting two profiles together. So why wait? Add this essential component to your balustrade kit today!

Dowels

Dowels for Balustrade Channel

Our Left Side Fixed Easy Fit End Cap is specifically designed to be used in conjunction with our Easy Fit Side Fixed Channel System when the channel is being finished with cladding. This end cap is made from anodized aluminum and is secured in place with silicone or glue. It is suitable for both domestic and commercial applications and provides a neat and finished look to the side of the channel.
Please note that this end cap is for the left side of the channel and the right side end cap can be found separately on our website. If you have any questions about whether this end cap is suitable for your needs, don&#8217;t hesitate to contact our team. At the Origin Architectural, we are dedicated to helping you choose the right products for your project, so don&#8217;t hesitate to ask for advice.

End Caps (Shaped Left)

end caps

End Caps Shaped Left

Left End Caps

Our Right Side Fixed Easy Fit End Cap is specifically designed to be used in conjunction with our Easy Fit Side Fixed Channel System when the channel is being finished with cladding. This end cap is made from anodized aluminum and is secured in place with silicone or glue. It is suitable for both domestic and commercial applications and provides a neat and finished look to the side of the channel.
Please note that this end cap is for the right side of the channel and the left side end cap can be found separately on our website. If you have any questions about whether this end cap is suitable for your needs, don&#8217;t hesitate to contact our team. At the Origin Architectural, we are dedicated to helping you choose the right products for your project, so don&#8217;t hesitate to ask for advice.

End Caps (Shaped Right)

End Caps Shaped Right

Right Side Fixed Easy Fit End Cap

This Easy Fit Base Fixed End Cap is made from anodized aluminum and is designed to fit securely at the end of our Easy Fit Base Fixed Channel system. It has a sleek finish, hiding the view of clamp kits and glass from the side, making it suitable for both domestic and commercial applications.
This end cap is secured with silicone or glue, ensuring a neat and finished look once installed. If you have any questions about whether this end cap is suitable for your needs, please don&#8217;t hesitate to contact our team. At the Origin Architectural, we are dedicated to helping you choose the right products for your project, so don&#8217;t hesitate to ask for advice.

End Caps - Base Fix

Easy Fit Base Fixed End Cap

Our prefabricated 90 degree easy fit balustrade channel corner is the perfect solution for anyone looking to save time and effort during installation. This corner is pre-made at a 90 degree angle, making it easy to install and eliminating the need to mitre the channel. Made from high-quality anodised aluminium, this corner is built to last. It&#8217;s strong, durable, and resistant to corrosion, making it the perfect choice for both indoor and outdoor installations. The anodised finish gives the corner a sleek, modern look that will complement any balustrade installation. 
Installation is a breeze with this prefabricated corner. Simply slide it into place and secure it with a set screw. It&#8217;s that easy! The corner will hold the two channels firmly in place, creating a seamless and secure connection. 
Whether you&#8217;re installing a new balustrade or replacing an old one, this prefabricated corner is the perfect solution. It&#8217;s made from high-quality anodised aluminium, making it strong and durable, and it saves time and effort during installation. So why wait? Add this essential component to your balustrade kit today and make your installation a snap!

90° Corner

90 degree easy fit balustrade channel corner

Our Easy Fit Bottom Cladding is a stylish and practical way to finish off your Easy Fit aluminium channel balustrade system. This cladding cover is made from durable anodised aluminium and is designed to cover fixing holes and screw heads at the bottom of the channel, giving your installation a clean and polished look. It is available in 3m lengths and clips onto the bottom of the channel, making it easy to install. Please note that mounting strips are not included with this cladding as they are not required &#8211; easy! 
This cladding can be used as an alternative to hole plugs or blanking plugs. It is important to note that the cladding does not provide any structural support and is for aesthetic purposes only. 
If you have any questions about this product or whether it is suitable for your needs, don&#8217;t hesitate to contact our team. At Origin Architectural, we are dedicated to helping you choose the right products for your project. Our knowledgeable team is always here to offer guidance and advice.

Bottom Cladding

Easy Fit Bottom Cladding

Our Easy Fit Side Fixed Channel System is designed to be fascia mounted onto a wall, making it perfect for both commercial and domestic applications. Made from anodized aluminum, this channel is suitable for both internal and external use and is naturally protected against salt water and corrosive conditions. It is also capable of supporting loads up to 1.5kN.
This channel is unique in that it is drilled on both walls of the U-shape, requiring side cladding for a finished look. It is available in 3m lengths, but we also offer a bespoke cutting service to meet your specific size requirements. It comes with pre-drilled holes at 150mm centres to suit M10 bolts or screws, depending on your application. Fixings can be purchased separately on our website to suit steel, concrete, stone, or timber.
Our Easy Fit Side Fixed Channel System features innovative screw-clamp technology that locks glass panels into position effortlessly, with four immobilizing fasteners per meter of channel. This system allows for perfect alignment of each panel during or even after installation.
In addition to our standard channel, we offer a range of RAL/BS colors at a small surcharge and can also provide a matte finish, gloss finish in black and silver colors, or textured finishes on selected colors. If you have any questions about our Easy Fit Side Fixed Channel System, don&#8217;t hesitate to contact our experienced team for advice

Channel - Commercial

Category

Side

Length 1

Category

Side

Length 1

£38.40incl. VAT

£46.86incl. VAT

£507.17incl. VAT

£459.38incl. VAT

£78.47incl. VAT

£146.38incl. VAT

£4.75incl. VAT

£6.59incl. VAT

£6.59incl. VAT

£1.52incl. VAT

£4.93incl. VAT

£0.98incl. VAT

Your Cart

Channel - Commercial

Category

Side

Length 1

Category

Side

Length 1

£38.40incl. VAT

£46.86incl. VAT

£507.17incl. VAT

£459.38incl. VAT

£78.47incl. VAT

£146.38incl. VAT

£4.75incl. VAT

£6.59incl. VAT

£6.59incl. VAT

£1.52incl. VAT

£4.93incl. VAT

£0.98incl. VAT

Your Cart

Got a Question?