Glass Connectors

Grade

Size

Finish

Our 180 degree stainless steel glass to glass clamps for glass balustrades suit monolithic and laminated glass 10mm thick. These stylish stainless steel 180 degree glass clamps are designed for in-line intermediate connections of glass balustrade panels, offering a quick and easy way to ensure glass panels are perfectly secure and aligned for frameless glass systems. 
Super simple to install, manufactured from hard-wearing 316 (external) grade stainless steel with a superb brushed stainless steel satin finish. We recommend you have a minimum of 30mm gap between panels to ensure you have enough room between the panels to fit the stiffeners. Generally we advise you fit the 180 degree clamps around 100mm to 200mm from the top of the glass to add the most stability. 
Please note this 180 degree middle D glass lugs come with 10mm glass rubbers. We also offer a 90 degree variation. This includes 4 x M8 Bolts, Screw Cap, Safety Pin &amp; 10mm Rubbers. A glass hole cut out is not required if the safety pin isn’t being used. 
At the Origin Architectural, we believe in providing you with choice, which is why we can offer bespoke sizing and RAL/BS colours at a small surcharge, so contact us to discuss our bespoke range! Most colours are available with a matt finish, gloss is available in black and silver colours and textured finishes are also possible on selected colours. Upon request we can also offer mirror polished chrome finish if required!

Glass Connector 180° 10mm Glass

Satin

FLAT

Glass Clamps

Glass Connector

Glass Connector 180° for 10mm Glass

Angle

Our 90 degree stainless steel glass to glass clamps for glass balustrades suit monolithic and laminated glass 10mm thick. These stylish stainless steel 90 degree corner glass clamps are designed for in-line corner connections of glass balustrade panels, offering a quick and easy way to ensure glass panels are perfectly secure and aligned for frameless glass systems. 
Super simple to install, manufactured from hard-wearing 316 (external) grade stainless steel with a superb brushed stainless steel satin finish. We recommend you have a minimum of 30mm gap between panels to ensure you have enough room between the panels to fit the stiffeners. Generally we advise you fit the 90 degree clamps around 100mm to 200mm from the top of the glass to add the most stability. 
Please note this 90 degree corner middle D glass lugs come with 10mm glass rubbers. We also offer a 180 degree variation. This includes 4 x M8 Bolts, Screw Cap, Safety Pin &amp; 10mm Rubbers. A glass hole cut out is not required if the safety pin isn’t being used. 
At the Origin Architectural, we believe in providing you with choice, which is why we can offer bespoke sizing and RAL/BS colours at a small surcharge, so contact us to discuss our bespoke range! Most colours are available with a matt finish, gloss is available in black and silver colours and textured finishes are also possible on selected colours. Upon request we can also offer mirror polished chrome finish if required!

Glass Connectors

Grade

Size

Finish

Angle

Grade

Size

Finish

Angle

£21.60incl. VAT

£18.20incl. VAT

Your Cart

Glass Connectors

Grade

Size

Finish

Angle

Grade

Size

Finish

Angle

£21.60incl. VAT

£18.20incl. VAT

Your Cart

Got a Question?